Operation
160/172
25.2
Operating disconnector panels
Connecting the disconnector with the busbar
Initial situation
Close the three-position disconnector (insert the
operating lever and turn 180° clockwise).
Disconnecting the disconnector from the busbar
Initial situation
Open the three-position disconnector (insert the
operating lever and turn 180° counter-
clockwise).
Revision 05 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • 802-9074.9
Push the control gate to the left.
Remove the operating lever (the control gate
returns to its initial position).
Push the control gate to the left.
Remove the operating lever (the control gate
returns to its initial position).