Siemens NXPLUS C Installation And Operating Instructions Manual page 35

Service flap (option)
802-9074.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • Revision 05
The service flap for fastening the standard accessories is located in the switchgear
termination.
Fig. 23: Service flap with standard accessories
NOTE!
Changed switchgear width due to service flap
Due to the service flap, the switchgear width is extended by 50 mm.

ATTENTION!
Risk of injury when closing the service flap! Fingers can be trapped between service flap and
switchgear front.
Hold service flap at the provided recess when closing it.

ATTENTION!
Do not let service flap shut close! Switchgear may be damaged.
Close service flap in a controlled manner.

Description
Service flap
35/172