Siemens NXPLUS C Installation And Operating Instructions Manual page 81

802-9074.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • Revision 05
Remove 11 bolts M5x10 and 3 bolts M5x16 at the right-hand busbar cover

Remove the right-hand busbar cover upwards.

The busbar covers are removed.
r
Mounting new partitions
During installation of the voltage transformers in the right end panel, the busbar partition
must be removed and replaced by a new partition.
The new busbar partition
Remove the old partition

is delivered together with the voltage transformers.
. To do this, undo and keep 3 nut-and-washer assemblies M8.
Installation
.
Old partition (mounted
on the busbar)
New partition
81/172