Short Instructions - Siemens NXPLUS C Installation And Operating Instructions Manual

Operation
156/172
25

Short instructions

DANGER!
Danger in case of maloperation! The following short instructions give an overview of the
operating procedures.
Perform the switching operations as described (see page 133, "Operating the circuit-

breaker") and observe the warnings given there.
The operating levers for the three-position switches with/without adapter are coded and
identified by color:
Operating levers for three-position disconnector
Fig. 143: Operating lever for DISCONNECTING
function
Fig. 145: Socket of operating lever,
DISCONNECTING
To operate the three-position switch-disconnector, one of the two adapters is pushed onto the
operating lever for the DISCONNECTING function of the three-position disconnector.
The function of the two adapters is marked respective symbols.
Operating lever for three-position switch-disconnector
Fig. 147: Operating lever with adapter
Revision 05 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • 802-9074.9
Fig. 144: Operating lever for EARTHING/
READY-TO-EARTH function (handle
painted red)
Fig. 146: Socket of operating lever,
EARTHING/READY TO EARTH
Fig. 148: Operating lever
Fig. 149: Adapter for DISCONNECTING
function with DISCONNECTING
symbol (see arrow)
Fig. 150: Adapter for EARTHING function
with EARTHING symbol (see arrow)