Siemens NXPLUS C Installation And Operating Instructions Manual page 97
Medium-voltage switchgear/wind fixed mounted circuit-breaker switchgear up to 36 kv, extendable
Hide thumbs
Also See for NXPLUS C:
- Installation and operating instructions manual (293 pages) ,
- Installation and operating instructions manual (266 pages)
Table of Contents
Advertisement
Mounting the floor plates
802-9074.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • Revision 05
With a knife, cut an opening into the rubber sleeve that fits the diameter of the cable.
Mounting the pressure-resistant floor cover
Push the rubber sleeve onto the cable T-plug.
Connect the cable T-plug (see page 99, "Connecting cable T-plugs").
Insert the rubber sleeve with cable plug into the recess of the floor plate.
Fig. 83:
Example for panel width 450 mm
Installation
97/172
Advertisement
Table of Contents
