Earthing The Three-Position Switch-Disconnector - Siemens NXPLUS C Installation And Operating Instructions Manual

802-9074.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • Revision 05
Remove the operating lever. The control gate moves to the center position automatically.

Refit the padlock at desired position.

The locking device of the switching gate can be padlocked in all three switch positions.
r
22.4

Earthing the three-position switch-disconnector

Check the ready-for-service indicator.

Remove the padlock (optional).

To release the switching gate, push the control gate downwards and hold.

Insert the operating lever and move straight to EARTHED position.

The switchgear is earthed.
r
Remove the operating lever. The control gate moves to the center position automatically.

Operation
147/172