Saving The Setting Data Onto A Microsd Card; D Formatting A Microsd Card - Icom ID-52A Basic Manual

■ Saving the setting data onto a microSD card

You can save the Memory channels, MENU screen item settings, repeater lists, and so
on, onto a microSD card.
Saving settings onto a card enables you to easily restore the transceiver to its previous
settings, even if you perform an All Reset.

D Formatting a microSD card

IMPORTANT! Before using a microSD card for the first time, format it in the transceiver.
Formatting a card erases all its data. Before formatting any used card, back up its data
onto another device.
[MENU] > SET > SD Card > Format
1. Turn ON the transceiver.
• If a microSD card is inserted, the microSD icon " " is displayed.
• While accessing, the icon blinks.
2. Push [MENU].
3. Select "SD Card" in the "SET" menu.
4. Select "Format."
• The confirmation dialog is displayed.
5. Select "Yes."
• The formatting starts, and the display shows the formatting progress.
• After the formatting ends, returns to the SD CARD screen.
L If "The GPS Logger function is activated." and/or "The QSO Log function is activated."
are displayed, turn OFF the functions or ignore the messages and select "YES."
L To exit the MENU screen, push [MENU].
INITIAL SETUP
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
8