Parameterization Errors Spindle/Axis - Siemens Sinumerik 840C Diagnostics Manual

5

Parameterization Errors Spindle/Axis

The Service numbers can be found under DIAGNOSIS in the Service display
Axes/Spindles menu.
Service
number
Parameterization errors spindle/axis
300 Sampling ratio incorrect
and/or
with SW 5.4 and higher: The monitoring cycle
set for Safety Integrated via MD 40010 is not a
multiple of the position control cycle for this
axis.
301 to 307 (reserved)
308 Incorrect increment weighting
309 Incorrect actual-value resolution
310 (reserved)
311
312 a) Error in encoder speed ratios
(MD value = 0)
b) Speed ratios not 1:1 for axis with di-
stance-coded measuring system
313 (reserved)
314 Illegal servo gain K
315 (reserved)
316 Illegal modulo value/axis is not a rotary axis
1)
317 Position control cycle LA/LS is not the same
Position control cycle FA/FS
1)
318 Incorrect LA/LS/FA/FS number parameterized
1) SW 3 and higher

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
The Safety Integrated service data are described in the
SINUMERIK Safety Intergrated documentation (Description
of Functions).
Significance
factor
v
5 Parameterization Errors Spindle/Axis
Remedy
General Axis
MD 155 MD 1396* MD
160
163
168
MD 40010
MD 364*
368*
1208*
1212*
MD 1116*
1204*
MD 3032*
to 3060*
MD 3064*
to 3092*
MD 252*
260*
256*
MD 344*
564*
MD 1396* MD
Spindle
466*
MD 40010
466*
456*
524*
468*
458*
MD 2400*
to 2407*
MD 2408*
to 2415*
MD 435*
to 442*
468*
466*
5–1