Siemens Sinumerik 840C Diagnostics Manual page 178

1 Alarms
1.5.1 Alarm description
165020 Error on selecting file
Scan
Selection of Edit or Edit new
Effect
Function is not performed
Explanation
Internal error on file selection
Remedy
Please notify Siemens Service
Note
Applies as from SW 4
165021 Drive configuration has not been saved
Scan
Saving, loading drive MD
Effect
Function is not executed
Explanation
The configuration must first be saved
Remedy
Press softkey "Accept conf.+NCKPO", repeat operation
165022 Data has not been written on hard disk
Scan
Saving machine data
Effect
Files incomplete
Explanation
Hard disk is probably full
Remedy
Check free memory on hard disk
165023 Drive is not in configuration
Scan
Saving, loading drive MD
Effect
Fucntion is not executed
Explanation
The configuration must first be accepted (saved)
Remedy
Change configuration and accept, with repeat operation
165024 Selected file cannot be copied
Scan
Copying MD files
Effect
Function is not executed
Explanation
BOOT or <online> data was selected
Remedy
Select standard or user file
165025 Error: file has not been copied
Scan
Copying MD files
Effect
Function is not executed
Explanation
The named file does not exist
Remedy
–
165026 Name is reserved for standard data
Scan
Edit new, saving, inserting MD files
Effect
Function is not executed
Explanation
This name cannot be used for user files
Remedy
Enter a different name
1–170

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey