Siemens Sinumerik 840C Diagnostics Manual page 183

04/96
165053 NQFK data... not loaded
Scan
"Load from hard disk" softkey in the File functions menu in the Diagnosis/Start-up/Machine data display
Effect
The NQFK data have not been loaded.
Explanation
System error
Remedy
Please notify Siemens service.
Note
Alarm in SW 5 and higher
165054 NQFK data for axis ... not loaded
Scan
"Load from hard disk" softkey in the File functions menu in the Diagnosis/Start-up/Machine data display
Effect
The NQFK data of the stated axis have not been loaded.
Explanation
The NQFK ASCII file of the stated axis is defective or not compatible.
Remedy
Delete or correct file, repeat procedure.
Note
Alarm in SW 5 and higher
165055 Equivalent circuit data have not been calculated
Scan
Softkey "Calculate equivalent circuit diagram"
Effect
Invalid data in drive.
Explanation
–
Remedy
Repeat action
Note
Alarm in SW 5 and higher
165056 Carry out safety acceptance test
Scan
Softkey "Accept safe functions"
Effect
–
Explanation
Without acceptance test, the operator's life and limb are at risk.
Remedy
The acceptance test must be performed in accordance with the valid safety regulations.
Note
Applies as from SW 5.4
165057 Sisitec data TEA1 axis read error
Scan
Softkey "Accept safe functions"
Effect
The function has not been performed.
Explanation
–
Remedy
If necessary, first start up the axis.
Note
Applies as from SW 5.4
165058 Sisitec data TEA3 drive write error
Scan
Softkey "Accept safe functions"
Effect
The function has possibly been performed incompletely, data may be inconsistent.
Explanation
–
Remedy
If necessary, first start up the drive.
Note
Applies as from SW 5.4

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
1–175