Siemens Sinumerik 840C Diagnostics Manual page 184

1 Alarms
1.5.1 Alarm description
165059 Check input new SI password different
Scan
Softkey "Change password"
Effect
The password has not been changed
Explanation
The new password must be entered again in the third field to ensure that it has been entered correctly.
Remedy
Repeat input.
Note
Applies as from SW 5.4
165060 Rated power too small (MD x130
Scan
Softkey "Calculate equivalent circuit diagram data (MSD only)"
Effect
The equivalent circuit diagram data have not been changed.
The rated power (in MD 1130 and MD 2130) must not be  0.
Explanation
Remedy
Correct value, repeat function.
Note
Applies as from SW 5.4
165061 Rated voltage too small (MD x132
Scan
Softkey "Calculate equivalent circuit diagram data (MSD only)"
Effect
The equivalent circuit diagram data have not been changed.
The rated voltage (in MD 1132 and MD 2123) must not be  0.
Explanation
Remedy
Correct value, repeat function.
Note
Applies as from SW 5.4
165062 Rated current too small (MD x103
Scan
Softkey "Calculate equivalent circuit diagram data (MSD only)"
Effect
The equivalent circuit diagram data have not been changed.
The rated current (in MD 1103 and MD 2103) must not be  0.
Explanation
Remedy
Correct value, repeat function.
Note
Applies as from SW 5.4
165063 Cos Phi power factor wrong
Scan
Softkey "Calculate equivalent circuit diagram data (MSD only)"
Effect
The equivalent circuit diagram data have not been changed.
The Cos Phi power factor (in MD 1129 and MD 2129) must not be  0 and must not exceed 0.996.
Explanation
Remedy
Correct value, repeat function.
Note
Applies as from SW 5.4
165064 Pole pair no. (ratio MD x134/MD x400) illegal
Scan
Softkey "Calculate equivalent circuit diagram data (MSD only)"
Effect
The equivalent circuit diagram data have not been changed.
Explanation
The pole pair no. (ratio rated frequency (MD 1134 and MD 2134) /rated speed (MD 1400 and MD 2400)) is illegal.
Remedy
Correct value, repeat function.
Note
Applies as from SW 5.4
1–176
v
0)
v
0)
v
0)

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey