Siemens Sinumerik 840C Diagnostics Manual page 108

1 Alarms
1.5.1 Alarm description
102010 Configuring error
S
Scan
First display of a data selector in MMC
S
Effect
Empty display
S
Explanation
Possibly a consequential error, since data selector cannot work in the services, diagnosis, programming area
S
Remedy
Check/change configuration of UMS/FUMS.
102013 Only ... of ... elements displayed
Scan
When data selector is called
Effect
Data only partially displayed
Explanation
Quantity of displayed data limited internally
Remedy
–
103000 DUAL PORT RAM error!
Scan
–
Effect
–
Explanation
Hardware problem or incorrectly installed by OEM
Remedy
Replace hardware if necessary
104000 Maximum line length reached
Scan
When inputting/inserting in the ASCII editor on MMC
Effect
Operation is not executed
Explanation
The maximum line length of the ASCII editor is exceeded
Remedy
Shorter lines
104001 Search text not found
Scan
When searching
Effect
None
Explanation
The ASCII editor in the MMC outputs a message that the search for a character string has not been successful.
Remedy
–
104002 File cannot be opened
Scan
When displaying an ASCII editor in MMC
Effect
Empty display in ASCII editor
Explanation
ASCII editor cannot find the file to be processed in the data management
Remedy
None
104004 Buffer is empty
Scan
ASCII editor when pasting from clipboard
Effect
Operation is not executed
Explanation
By operator action the ASCII editor is requested to paste from the clipboard into the file processed. The clipboard,
however, is empty, not available or faulty. Possibly an operating error
S
Remedy
Other operator action
S
Fill clipboard
1–100

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey