Siemens Sinumerik 840C Diagnostics Manual page 125

04/96
110054 No punch tape format or it is faulty
Scan
DATA IN-OUT / DATA INPUT / START
Effect
No reading-in
Explanation
No punch tape format found in archive, archive does not have a PC format or transmission was started at the
wrong time
Remedy
Check external data
110055 Too much data found
Scan
SERVICES / DATA OUTPUT
Effect
There is still more data that cannot be accessed
Explanation
The currently selected workpiece contains more data than can be displayed or processed (max 240 files)
Remedy
Select low no. of files for output
110056 PC format can be transmitted only with 8 data bits
Scan
DATA IN-OUT / ... / ... / START
Effect
No data read-in or out
Explanation
For reading in or out data in PC format the device must be parameterized with 8 data bits
Remedy
Suitably parameterize interface
110057 File not available
Scan
DATA IN-OUT / ... / ... / START
Effect
File not read out
Explanation
File is not available on MMC at the archiving time
Remedy
Faulty archive list or time problem
110058 Transfer aborted
Scan
DATA ON OFF / ... / ... / START
Effect
Not all the data was transferred.
Explanation
Abort occurred while file was being transferred.
Remedy
Check cable and peer.
110059 Cannot be transmitted in punch tape format
Scan
Archiving
Effect
Data is not archived.
Explanation
Only MPF, SPF, TOA, RPA, ZOA, UMS, SEA, TEA1, TEA2, TEA4 can be transmitted in LS format.
Remedy
Select other data or archive in PC format
110060 Stored in the clipboard
Scan
DATA IN-OUT / DATA INPUT / START
Effect
The file was entered in the clipboard
Explanation
The file could not be entered in the current directory (not possible, no authorization, file opened from PC editor)
Remedy
Paste from clipboard into the desired archive location

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
1–117