Siemens Sinumerik 840C Diagnostics Manual page 58

1 Alarms
1.5.1 Alarm description
3033 There is no display text
S
Scan
Cyclic
S
Effect
Display text not displayed
Explanation
The display text generated at the NC workstation has not been transferred to the link list.
Remedy
Check the link list and relink to the NC workstation; watch out for linking errors.
3034 There is no special text
S
Scan
On display selection
S
Effect
Special text not displayed
Explanation
The following texts have not been inserted or have been inserted incorrectly:
S
Menu texts
S
Dialog texts
S
Mode texts
Remedy
Check the display generated with NC workstation and where appropriate regenerate.
3035 Indirect addressing faulty
S
Scan
Cyclic
S
Effect
Variable values/texts not displayed
S
Explanation
The display description for indirect addressing is incorrect. This affects the details in the display
header for
– data group,
– data type,
– data number and
– data block.
S
Information for number of indirect elements of the list/display (IEL) is incorrect.
S
Variable text is selected but status or offset is not cancelled.
S
Variable value has been selected but status not cancelled.
Remedy
Check the information for
S
Start of range pointer,
S
Length of range pointer and
S
Cursor pointer
and check their relationship to one another
S
Check deselection of status or offset
3036 Variable status faulty
S
Scan
Cyclic
S
Effect
Status taken from display description
Explanation
In the display description form variable status, which can only be selected by the PLC, an incorrect data group has
been specified or variable status has not been cancelled.
Remedy
The display description must be modified with the aid of the NC workstation.
3037 User window faulty
Scan
On control power-up
Effect
Displays to be shown in incorrect user windows are not displayed.
Explanation
User windows can be defined in the UMS. These must lie within the configuring area, otherwise an alarm is given.
Remedy
Check and correct user window in the UMS.
1–50

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
Acknowledgement key
Acknowledgement key
Acknowledgement key
Acknowledgement key
Acknowledgement key