Siemens Sinumerik 840C Diagnostics Manual page 123

04/96
110039 Data cannot be copied
Scan
MANAGEMENT / COPY / PASTE / OK
Effect
Data are not copied
Explanation
General error, e.g. data type may exist only once
Remedy
E.g. delete data beforehand
110041 Error in NCK name
Scan
DATA IN-OUT / DATA INPUT / START
Effect
Data in punch tape format are not read in their entirety
Explanation
With data I/O in punch tape format the name is transmitted first. NCK data must begin with %MPF, %SPF, %TOA,
,%TEA, %SEA, %UMS, %RPA
Remedy
Alter external data
110042 Syntax error in UMS file
Scan
DATA IN-OUT / DATA INPUT / START
Effect
UMS file has been read in incorrectly
Explanation
Error in data
Remedy
Change external data
110043 Please use the proposed name
Scan
MANAGEMENT / NEW / OK
Effect
Data are not created
Explanation
–
Remedy
Use the proposed name
110044 Too many print jobs in queue
Scan
DATA IN-OUT / PRINT / START
Effect
Data are not sent to printer
Explanation
The number of print jobs allowed is limited
Remedy
Wait for the next print job to be completed or remove a print job from the job list
110045 ...signals transmission fault
Scan
DATA IN-OUT / (DATA INPUT OR OUTPUT)
Effect
Data have either not been transferred at all or only partially or incorrectly
Explanation
General error
Remedy
Check other station and cable, reselect interface
110046 System error ...
Scan
None
Effect
The last action has not been executed correctly
Explanation
None
Remedy
Inform system service

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
1–115