Back Panel - Nortel 325-24T Configuration Manual

Table 3 Ethernet Switch 325-24G LED descriptions (continued)
Label
T
A

Back panel

The back panel of the Ethernet Switch 325-24T is shown in
describes the components on the back panel.
Figure 5 Ethernet Switch 325-24T back panel
1
100-240 V-
50-60Hz 2A
Table 4 Components on the Ethernet Switch 325 back panel
Item
1
Cooling fans
Two cooling fans are located on one side of the Ethernet Switch 325 to provide
cooling for the internal components. (See
the switch, be sure to allow enough space on both sides of the switch for adequate
ventilation. For more information on installing the Ethernet Switch 325, see
Installing the Nortel Ethernet Switch 325 (217149-B).
Chapter 1 About Ethernet Switches 325 and 425
Color/Status
Green/steady
Amber/steady
Off
Green/blinking
Off
Description
AC power receptacle
Meaning
This port is set to operate at 1000 Mb/s, and
the link is good.
Station connected at 10/100 Mb/s.
No link on Copper uplink port.
Indicates activity on link.
No activity on the link.
Figure 2 on page
System Configuration Guide
61
Figure 5. Table 4
11110EA
57). When you install