Snmp Configuration Screen - Nortel 325-24T Configuration Manual

SNMP Configuration screen

The SNMP Configuration screen
SNMP configuration parameters.
To open the SNMP Configuration screen:
➨
Figure 80 SNMP Configuration screen
Read-Only Community String:
Read-Write Community String:
Trap #1 IP Address:
Trap #2 IP Address:
Trap #3 IP Address:
Trap #4 IP Address:
Authentication Trap:
AutoTopology:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Chapter 6 System configuration using the Console Interface
Choose SNMP Configuration (or press m) from the main menu.
SNMP Configuration
Community String:
Community String:
Community String:
Community String:
(Figure 80) allows you to set or modify the
[ public ]
[ private ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ Enabled ]
[ Enabled ]
Press Ctrl-C to return to Main Menu.
System Configuration Guide
219