Table of Contents
Advertisement
Figure 28 Main Menu for Ethernet Switch 425-48T console interface
Use arrow keys to highlight option, press <Return> or <Enter> to select
option.
3
Setting the system username and password
You can set usernames and passwords for system access through the Console
Interface, CLI, Telnet, and Web-based management. For more information, refer
to Configuring and Managing Security for Nortel Ethernet Switches 325 and 425,
Software Release 3.6 (320988-A).
Ethernet Switch 425-48T Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Display Hardware Units...
Spanning Tree Configuration...
TELNET/SNMP/Web Access Configuration...
Software Download...
Configuration File...
Display System Log...
Reset...
Reset to Default Settings...
Shutdown Command...
Command Line Interface...
Logout...
Using the Down Arrow key, scroll down to Command Line Interface, and
press Enter. The CLI prompt appears:
425-48T>
The
sign at the end of the name of the switch indicates that the default CLI
>
mode is User EXEC mode. Refer to
select the command mode you want to use (and are authorized to use).
Chapter 3 CLI Basics 127
"CLI command modes" on page
System Configuration Guide
120, to
Hide quick links:
Advertisement
Table of Contents
