No Lldp Tx-Tlv Command - Nortel 325-24T Configuration Manual

304 Chapter 7 System configuration using the CLI
Table 96
Table 96 lldp tx-tlv command parameters and variables
Parameters and
variables
port <portlist>
port-desc
sys-name
sys-desc
sys-cap
local-mgmt-addr

no lldp tx-tlv command

The
the transmitted LLDPDUs. The syntax for the
no lldp tx-tlv [port <portlist>] [port-desc] [sys-name]
[sys-desc] [sys-cap] [local-mgmt-addr]
The
Table 97
command.
Table 97 no lldp tx-tlv command parameters and variables
Parameters and
variables
port <portlist>
port-desc
sys-name
sys-desc
sys-cap
local-mgmt-addr
320985-A Rev 01
describes the parameters and variables for the
Description
Specifies the ports affected by the command.
Port description TLV
System name TLV
System description TLV
System capabilities TLV
Local management address TLV
no lldp tx-tlv
no lldp tx-tlv
describes the parameters and variables for the
Description
Specifies the ports affected by the command.
Port description TLV.
System name TLV
System description TLV
System capabilities TLV
Local management address TLV
command specifies the optional TLVs not to include in
command is in the config-if command mode.
lldp tx-tlv
command is:
lldp tx-tlv
no lldp tx-tlv
command.