Back Panel; Cascade Module Slot; Figure 4 Business Policy Switch 2000 Back Panel; Table 3 Business Policy Switch 2000 Back-Panel Descriptions - Nortel 2000 Using Manual

Back panel

The switch back panel is shown in

Figure 4 Business Policy Switch 2000 back panel

1

Table 3 Business Policy Switch 2000 back-panel descriptions

1
2
3

Cascade Module slot

The Cascade Module slot allows you to attach an optional BayStack 400-ST1
Cascade Module to the switch (see
You can connect up to eight switches into a redundant stack configuration.
Installation instructions are provided with each BayStack 400-ST1 Cascade
Module (see Installing the BayStack 400-ST1 Cascade Module). Use a flathead
screwdriver to remove the filler panel that covers the Cascade Module slot
(Figure 5).
For more information about cascade modules, see Installing the Cascade 400-ST1
Cascade Module. See your Nortel Networks sales representative for cascade
module ordering information.
AC power receptacle
RPSU connector
Cascade Module slot
Using the Business Policy Switch 2000 Version 1.2
Figure 4.
2
"Stack configurations" on page
43
3
9719EA
98).