Configuring System Security - Nortel 325-24T Configuration Manual

Table 143 Items on the Quick Start page
Section
Community
String
Trap Receiver
VLAN

Configuring system security

For information on configuring system security, please refer to Configuring and
Managing Security for Nortel Ethernet Switches 325 and 425, Software
Release 3.6 (320988-A)
Rebooting the Ethernet Switch 325/425
You can reboot a standalone switch or an entire stack without erasing any
configured switch parameters. While rebooting, the switch initiates a self-test that
comprises various diagnostic routines and subtests. The LEDs display various
patterns to indicate that the subtests are in progress.
To reboot the Ethernet Switch 325/425 without making changes (since your last
Submit request):
Chapter 11 Administering the switch using Web-based management
Item
Read-Only
Community String
Read-Write
Community String
Index
IP address
Community
Quick Start VLAN
Description
Specify a character string to identify the
community string for the SNMPv1
Read-Only community, for example, public or
private.
The default value is public.
Specify a character string to identify the
community string for the SNMPv1
Read-Write community, for example, public
or private.
The default value is private.
Select the number of the Trap Receiver to
create or modify.
Specify the network address for the SNMP
Manager that is to receive the specified Trap.
Type the Community String for the specified
Trap Receiver.
port-based
Specify the IP of the
.
VLAN
System Configuration Guide
379
Quick Start