Default Mac-Address-Table Aging-Time Command - Nortel 325-24T Configuration Manual

146 Chapter 3 CLI Basics
Figure 37
command.
Figure 37 mac-address-table aging-time output
425-48T(config)#mac-address-table aging-time 400
425-48T(config)#

default mac-address-table aging-time command

The
the switch retains unseen MAC addresses to 300 seconds. The syntax for the
default mac-address-table aging-time
default mac-address aging-time
The
command mode.
The
or variables.
320985-A Rev 01
displays sample output from the
default mac-address-table aging-time
default mac-address-table aging-time
default mac-address-table aging-time
mac-address-table aging-time
command sets the time that
command is:
command is in the config
command has no parameters