Table of Contents
Advertisement
32
Chapter 1 BayStack 380 Switch
Back panel
The switch back panel is shown in
the back panel.
Figure 4 BayStack 380 Switch back panel
Table 3 Components on the BayStack 380 Switch back panel
Redundant power supply unit (RPSU) and uninterruptible
power supply (UPS)
The redundant power supply connector allows you to connect a backup power
supply unit to the BayStack 380 Switch. Nortel Networks provides an optional
redundant power supply unit (RPSU) for this purpose. The BayStack 10 Power
Supply Unit (Order number AA0005005) is a hot-swappable power supply unit
that provides uninterrupted operation to as many as four BayStack 380 Switches
in the event that any of the switch power supplies fail.
The BayStack 10 Power Supply Unit has a powerful, modular redundant and
uninterruptible power supply (UPS) functionality in a single chassis. It provides
scalable power redundancy and protection to your networking equipment. The
modules fit into the right-hand side of the rear of the chassis. The UPS and
associated battery pack module fit into the front of the chassis.
212859-A
2
100-240 V-
50-60Hz 2A
Item
Description
1
DC-DC module for the Redundant power supply unit
(RPSU)
2
AC power receptacle
Figure
4.
Table 3
describes the components on
1
10474EA
Advertisement
Table of Contents
