Viewing Switch Ip Information - Nortel 325-24T Configuration Manual

1
2
Figure 129 Rate Limit tab
Table 125
Table 125 Rate Limit tab fields
Field
Traffic Type
AllowedRatePps
Enable

Viewing switch IP information

You can view the switch IP information using the IP dialog box.
Chapter 9 Configuring the switch using Device Manager 339
From the Device Manager main menu, choose Edit > Unit.
The Unit dialog box opens with the Unit tab displayed
page 338).
Click the Rate Limit tab.
The Rate limit tab opens
describes the Rate Limit tab fields.
Description
Specifies the traffic type.
Allowed traffic rate packets per second. It is in the range of 0-262143
(0-3FFFFh).
Note: Rate Limiting feature is disabled when AllowedRatePps equals
to 0.
When Enable is set to True, the TrafficType can either be multicast,
broadcast, or both.
Note: You can not set the Enabled field for both multicast and
broadcast TrafficeType to False at the same time. This is illegal
configuration.
(Figure 129).
(Figure 128 on
System Configuration Guide