312 Chapter 7 System configuration using the CLI
Figure 119 show lldp port tx-stats command output
425>show lldp port 1/1 tx-stats
-------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------------------------------------
Port
Frames
-------------------------------------------------------------------------
1/1
123
-------------------------------------------------------------------------
Figure 120
Figure 120 show lldp port tx-tlv command output
425>show lldp port 1/1 tx-tlv
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
Port
PortDesc SysName
------------------------------------------------------------------------
1/1
true
Configuring LEDs on the display panel
The
panel to identify the unit. The syntax of the
blink-leds <off> <stop> <unit>
The
320985-A Rev 01
lldp tx-stats
displays the output from the
lldp port tlvs
SysDesc
true
true
command allows you to configure the LEDs on the display
blink-leds
command is in the enable mode.
blink-leds
show lldp stats
SysCap
MgmtAddr
true
false
blink-leds
command.
command is: