Show Sys-Info Command - Nortel 325-24T Configuration Manual

138 Chapter 3 CLI Basics

show sys-info command

The
syntax for the
show sys-info
The
The
Figure 30
Figure 30 show sys-info command output
425-48T#show sys-info
Operation Mode:
MAC Address:
Reset Count:
Last Reset Type:
Power Status:
Autotopology:
Local GBIC Type:
Local GBIC Type:
sysDescr:
Mfg Date:
Serial #:
Operational State:Normal
sysObjectID:
sysUpTime:
sysNtpTime:
sysServices:
sysContact:
sysName:
sysLocation:
425-48T#
To change the system contact, name, or location, refer to the
command (see Configuring and Managing Security for Nortel Ethernet Switches
325 and 425, Software Release 3.6 (320988-A)).
320985-A Rev 01
command displays the current system characteristics. The
show sys-info
show sys-info
command is in the privExec command mode.
show sys-info
command has no parameters or variables.
show sys-info
displays sample output from the
Switch
00-0F-CD-BF-1E-80
34
Power Cycle
Primary Power
Enabled
(port 49) GBIC is missing
(port 50) GBIC is missing
Ethernet Switch 425-48T
HW:00 FW:3.5.0.2
05122004
SACC2600E5
1.3.6.1.4.1.45.3.57.1
2 days, 17:26:24
SNTP not synchronized.
3
c
Ethernet 425-48T
command is:
show sys-info
SW:v3.6.0
command.
snmp-server