The
command for displaying banner is in the config mode.
banner
Table 81
describes the parameters for the banner command.
Table 81 banner command parameters
Parameters
static
custom
disabled
<1-15> LINE
show banner command
The
command displays the banner. The syntax for the
show banner
command is:
banner
show banner [ custom | static ]
The
command is in the config mode.
show banner
Table 82
describes the parameters for the banner command.
Table 82 show banner command parameters
Parameters
static
custom
(if empty)
no banner command
The
command allows you to clear all lines of a previously stored
no banner
custom banner. The syntax for the
no banner
Chapter 7 System configuration using the CLI 281
Description
Displays the default agent-banner.
Displays the custom agent-banner.
Skips the agent-banner display.
Fills the Nth line of the custom banner
text specified in LINE.
Description
Displays default banner
Displays custom banner
Displays static, custom or disabled status if
parameter is not entered.
no banner
(1<N<15)
command is:
System Configuration Guide
with the
show