Table of Contents
Advertisement
Table 140 Interface tab fields for a single port (continued)
Field
AdminSpeed
OperSpeed
AutoNegotiationCapability
AutoNegotiationAdvertisments
MltId
IsPortShared
PortActiveComponent
Viewing and editing multiple port configurations
To view or edit the configurations of multiple ports:
1
2
Chapter 10 Configuring ports using Device Manager 371
Description
Set the port's speed.
The current operating speed of the port.
Specifies the port speed and duplex capabilities that a switch can support
on a port, and that may be advertised by the port using auto-negotiation
Specifies the port speed and duplex abilities to be advertised during link
negotiation.
The MultiLink Trunk to which the port is assigned (if any).
Specifies whether a port is shared. Multiple ports that are logically
represented as a single port are shared. Only one shared port may be
active at a time.
Specifies the physical port components that are active for a shared port.
Select the ports you want to edit.
Press Ctrl+left click the ports you want to view or configure. A yellow
outline appears around the selected ports.
Do one of the following:
•
From the shortcut menu, choose Edit.
•
From the Device Manager main menu, choose Edit > Port.
•
From the shortcut menu, choose Edit.
•
From the toolbar, click Edit.
Note:
When you edit multiple ports, some tabs are not available, and
some tabs are available even though the options are not applicable. When
the option does not apply for a given port, NoSuchObject is displayed.
System Configuration Guide
Hide quick links:
Advertisement
Table of Contents
