Back Panel; Ac Power Receptacle; Figure 1-5. Baystack 450 Switch Back Panel - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch

Back Panel

The BayStack 450 switch back-panel components (Figure 1-5) are the same for all
switch versions.
Descriptions of the back-panel components follow the figure.
1
1 = Cooling fans (not shown)
2

= AC power receptacle

3 = Cascade Module Slot
4 = RPSU connector
Figure 1-5. BayStack 450 Switch Back Panel
AC Power Receptacle
The AC power receptacle accepts the AC power cord (supplied). For installation
outside of North America, make sure that you have the proper power cord for your
region. Any cord used must have a CEE-22 standard V female connector on one
end and must meet the IEC 320-030 specifications.
Table 1-2 lists specifications for international power cords.
1-10
2
100-240V
47-63Hz~
Cascade Module
Redundant Power
4
3
BS45004B
309978-D Rev 01