Base Unit Info Tab - Nortel 325-24T Configuration Manual

346 Chapter 9 Configuring the switch using Device Manager
Table 129 System tab fields (continued)
Field
NextBootLoadProtocol
LastLoadProtocol

Base Unit Info tab

The Base Unit Info tab provides read-only information about the operating status
of the hardware and whether or not the default factory settings are being used.
To open the Base Unit Info tab:
1
2
3
Figure 134 Edit Chassis dialog box — Base Unit Info tab
320985-A Rev 01
Select the chassis.
From the shortcut menu, choose Edit > Chassis.
The Chassis dialog box opens with the System tab displayed
page 344).
Click the Base Unit Info tab.
The Base Unit Info tab opens
Description
The transport protocol to be used by the agent to load the
configuration information and the image at the next boot.
The transport protocol last used to load the image and
configuration information on the switch.
(Figure 134).
(Figure 133 on