Honeywell UDC2300 Product Manual page 162

Function Parameter Reference Guide
12.2.86 SGx TI
This prompt is part of the Setpoint Ramp/Program Set up group.
A soak segment is a combination of soak setpoint (see SGx SP) and a soak duration.
This is the Soak Setpoint Duration (Time) of Segment x.
.Range of Setting:
12.2.87 SDMODE
This prompt is part of the Communications Set up group.
SHED CONTROLLER MODE AND OUTPUT LEVEL—Determines the mode of local
control you want when the controller is shed from the communications link.
Selections
LAST SAME MODE AND OUTPUT—The controller will return to the same mode
(manual or automatic) at the same output level that it had before shed.
Man_
MANUAL MODE, SAME OUTPUT—The controller will return to manual
mode at the same output level that it had before shed.
FSAF MANUAL MODE, FAILSAFE OUTPUT—The controller will return to
manual mode at the output value selected at Control prompt FAILSAFE.
AUTO AUTOMATIC MODE, LAST SP—The controller will return to the automatic
mode and the last setpoint used before shed
12.2.88 SHD_SP
This prompt is part of the Communications Set up group.
The setpoint to be used after Shed is recalled.
Selections
LSP
Controller will use last local or remote setpoint used.
CSP When in "slave" mode, the controller will store the last host computer setpoint
and use it at the Local setpoint. When in "monitor" mode, the controller will
shed to the last UDC Local or Remote setpoint used, and the LSP is
unchanged
12.2.89 SHDTIM
This prompt is part of the Communications Set up group.
The number that represents how many sample periods there will be before the controller
sheds from communications. Each period equals 1/3 seconds; 0 equals No shed
Range of Setting:
152
(SEGMENT DURATION - x = Segment Number 1 THROUGH 12)
0-99 hrs:59 min
(SHED MODE)
Definitions
(SHED SETPOINT RECALL)
Definitions
.
(SHED TIME)
0 to 255 Sample Periods
UDC2300 Controller Product Manual
.
.
12/00