Output Calibration - Honeywell UDC2300 Product Manual

9.1 Overview
Introduction
This section describes the field calibration procedures for the following types of outputs:
• Current Proportional Output
• Auxiliary Output
• Motor Travel Time Setting for Three Position Step
What's in this section?
The following topics are covered in this section.
9.1 Overview
0 Current Proportional Output Calibration
9.3 Auxiliary Output Calibration
9.4 Three Position Step Control Output Calibration
OUTPUT CALIBRATION MAY REQUIRE ACCESS TO HAZARDOUS LIVE CIRCUITS, AND
SHOULD ONLY BE PERFORMED BY QUALIFIED SERVICE PERSONNEL. MORE THAN
ONE SWITCH MAY BE REQUIRED TO DE-ENERGIZE UNIT BEFORE CALIBRATION.
12/00

9 Output Calibration

TOPIC
WARNING—SHOCK HAZARD
UDC2300 Controller Product Manual
Troubleshooting/Service
See Page
95
96
98
100
!
95