Administrator Guide - SoundPoint
Attribute
call.shared.oneTouchResume
a. The call diversion, no answer feature will take precedence over this feature if enabled. For
4.6.1.10.1 Hold, Local Reminder <localReminder/>
Attribute
call.hold.localReminder.enabled
call.hold.localReminder.period
call.hold.localReminder.startDelay
4.6.1.11 Directory <directory/>
The directory is stored in either flash memory or RAM on SoundPoint
tory size is limited based on the amount of flash memory in the telephone
6. IP 500 has 2 megabytes of flash memory, IP 600 has 4 megabytes of flash memory.
84
®
IP SIP
more information, see 4.6.3.3.3 No Answer <noanswer/> on page 112.
Copyright © 2004 Polycom, Inc.
Permitted
Values
Default
Interpretation
0, 1
0
If set to 1, when a shared line has a call on
hold the remote user can press that line
and resume the call. If more than one call
is on hold on the line then the first one will
be selected and resumed automatically.
If set to 0, pressing the shared line will
bring up a list of the calls on that line and
the user can select which call the next
action should be applied to.
Permitted
Values
Default
0, 1
0
non-negative
60
integer
non-negative
90
integer
Optimizing SoundPoint
Interpretation
If set to 1, periodically notify the
local user that calls have been on
hold for an extended period of
time.
Time in seconds between subse-
quent reminders.
Time in seconds to wait before
the initial reminder.
®
IP. The direc-
6
.
Need help?
Do you have a question about the SoundPoint IP 600 SIP and is the answer not in the manual?