Polycom SoundPoint IP 600 SIP Administrator's Manual page 112

Administrator Guide - SoundPoint IP
Attribute
voIpProt.SIP.specialEv-
ent.checkSync.alwaysReboot
4.6.2.1.4 Dial Plan <dialplan/>
Attribute
dialplan.impossibleMatch-
Handling
dialplan.removeEndOfDial
4.6.2.1.4.1 Digit Map <digitmap/>
Attribute
dialplan.digitmap
106
Permitted
Values
0, 1
Permitted
Values
0, 1 or 2
0, 1
Permitted Values
string compatible with
the digit map feature
of MGCP described in
2.1.5 of RFC 3435.
String is limited to 512
bytes and 20 seg-
ments; a comma is
also allowed; when
reached in the digit
map, a comma will
turn dial tone back on.
Copyright © 2004 Polycom, Inc.
Default Interpretation
0 If set to 1, always reboot when a
NOTIFY message is received from
the server with event equal to
check-sync.
If set to 0, only reboot if any of the
files listed in [mac].cfg have
changed on the FTP server when a
NOTIFY message is received from
the server with event equal to
check-sync.
Default Interpretation
0 If set to 0, the digits entered up to
and including the point where an
impossible match occurred are sent
to the server immediately.
If set to 1, give reorder tone.
If set to 2, allow user to accumulate
digits and dispatch call manually
with the
Send
1 If set to 1, strip trailing # digit from
digits sent out.
Default
[2-9]11|0T|
011xxx.T|
[0-1][2-
9]xxxxxxxxx|
[2-9]xxxxxxxxx|
[2-9]xxxT
Optimizing SoundPoint
soft key.
Interpretation
When this attribute is
present, number-only
dialing during the setup
phase of new calls will
be compared against the
patterns therein and if a
match is found, the call
will be initiated automat-
ically eliminating the
need to press Send.