Polycom SoundPoint IP 600 SIP Administrator's Manual page 92

Administrator Guide - SoundPoint
.fnt or .fon
described:
• Font file name:
• <fontName> is a free string of characters that typically carries the meaning of
• <fontHeightInPixels> describes the font height in number of screen pixels.
• <fontRange> describes the Unicode range covered by this font. Since .fnt or
• <fontExtension> describes the file type. Either .fnt for single 256 characters
If it is necessary to overwrite an existing font, use these <fontName>_<fontHeightIn-
Pixels>:
SoundPoint
"fontProp_10"
"fontPropSoftkey_10"
SoundPoint
"fontProp_12"
"fontProp_19"
"fontProp_26"
"fontProp_x"
If the <fontName>_<fontHeightInPixels> does not match any of the names above,
then the downloaded font will be applied against all fonts defined in the telephone,
which means that you may lose the benefit of fonts being calibrated differently
depending on their usage. For example, the font used to display the time on the
Sound Point
you overwrite this default font with a unique font, you lose this size aspect.
Example of usage:
• to overwrite the font used for SoundPoint
7. .fon file format is a collection of .fnt fonts mangled together within a single file.
86
®
IP SIP
7
file format. The font file name must follow a specific pattern as
<fontName>_<fontHeightInPixels>_<fontRange>.<fontExtension>
the font. Examples are "fontFixedSize" for a fixed-size font, or "fontPropor-
tionalSize" for a proportional size font.
.fon are 256 characters based blocks, the <fontRange> is Uxx00_UxxFF (.fnt
file) or Uxx00_UyyFF (.fon file). For more information, see 3.5.1 Multilingual
User Interface on page 41.
font or .fon for multiple .fnt files.
®
IP 500
®
IP 600
® IP 600 is a large font, larger than the one used to display the date, and if
name should be "fontPropSoftkey_10_U0000_U00FF.fnt"
Copyright © 2004 Polycom, Inc.
This is the font used widely in the current implementation.
This is the soft key specific font.
This is used in some specific menus like CPU load (a smaller font).
This is the font used widely in the current implementation including
for soft keys.
This is the font used to display time (but not date).
This is a small font used for the CPU/Load/Net utilization graphs,
this is the same as the "fontProp_10" for the SoundPoint
®
IP 500 soft keys for ASCII, the
Optimizing SoundPoint
®
IP 500.