Polycom SoundPoint IP 600 SIP Administrator's Manual page 109

Administrator Guide - SoundPoint
Attribute
voIpProt.server.x.register
voIpProt.server.x.retryTimeOut
voIpProt.server.x.retryMaxCount
voIpProt.server.x.expires.lineSeize
a. This is SoundPoint
server may be different. SoundPoint
period has expired.
4.6.2.1.3 SIP <SIP/>
Attribute
voIpProt.SIP.useRFC2543hold
voIpProt.SIP.lcs
®
IP
Permitted
Values
0, 1
Null or
non-negative
integer
Null or
non-negative
integer
positive integer,
minimum 10
®
IP's requested registration period. The period negotiated with the
®
Permitted
Values
0, 1
0, 1
Copyright © 2004 Polycom, Inc.
Default Interpretation
1 If set to 0, calls can be routed to
an outbound proxy without reg-
istration.
0 If set to 0 or Null, use standard
RFC 3261 signaling retry
behavior. Otherwise retries
will be sent every retryTime-
Out ms (100 ms resolution).
0 If set to 0 or Null, use standard
RFC 3261 signaling retry
behavior. Otherwise retryMax-
Count retries will be attempted
before moving on to the next
available server.
30 Requested line-seize subscrip-
tion period.
IP will attempt to re-register when half the negotiated
Default Interpretation
1 If set to 1, use the obsolete c=0.0.0.0
RFC2543 technique, otherwise, use
SDP media direction attributes (such as
a=sendonly) per RFC 3264 when initi-
ating hold. In either case, the telephone
processes incoming hold signaling in
either format.
0 If set to 1, the proprietary "epid"
parameter is added to the From field of
all requests to support Windows Live
Communications Server.
Optimizing SoundPoint
103