Call Management Features - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint

3.2 Call Management Features

3.2.1 Automatic Off-hook Call Placement
SoundPoint
each registration.
Central
(boot
server)
Local
3.2.2 Call Hold
Call hold is a fundamental SoundPoint
activity on one call so that the user may use the telephone for another task, such as to
make or receive another call. Network signalling is employed to request that the
remote party stop sending media and to inform them that they are being held. A con-
figurable local hold reminder feature can be used to remind the user that they have
placed calls on hold.
Central
(boot
server)
Local
®
IP
®
IP supports an optional automatic off-hook call placement feature for
Configuration file:
phone1.cfg
Web Server
(if enabled)
Local Phone User
Interface
Configuration file:
sip.cfg
Configuration file:
ipmid.cfg
Web Server
(if enabled)
Local Phone User
Interface
Copyright © 2004 Polycom, Inc.
Specify which registrations have the feature and what
contact to call when going off hook.
• For more information, see 4.6.3.2.2 Automatic Off-
hook Call Placement <autoOffHook/> on page 110.
None.
None.
®
IP feature. The purpose of hold is to pause
Specify whether RFC 2543 (c=0.0.0.0) or RFC 3264 (a=sen-
donly or a=inactive) outgoing hold signalling is used.
• For more information, see 4.6.2.1.3 SIP <SIP/> on
page 103.
Specify local hold reminder options.
• For more information, see 4.6.1.10.1 Hold, Local
Reminder <localReminder/> on page 84.
None.
None.
Features
33