Fonts <Font - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
When the volatile storage option is enabled, ensure that a properly configured boot
server that allows uploads is available to store a back-up copy of the directory or its
contents will be lost when the telephone reboots or loses power.
Attribute
dir.local.volatile.2meg
dir.local.nonVolatile.maxSize.2meg
dir.local.volatile.4meg
dir.local.nonVolatile.maxSize.4meg
dir.local.volatile.maxSize
4.6.1.12 Fonts <font/>
These settings control the SoundPoint
font file during boot up. Loaded fonts can either overwrite pre-existing fonts embed-
ded within the software (not recommended) or can extend the SoundPoint
support for Unicode ranges not already embedded. The font file must be a Microsoft
®
IP SIP
Permitted
Values
0, 1
1 to 20
0, 1
1 to 50
1 to 100
Copyright © 2004 Polycom, Inc
Default Interpretation
0 Attribute applies to platforms
with 2 Mbytes of flash mem-
ory.
If set to 1, use volatile storage
for telephone-resident copy of
the directory to allow for larger
size.
20 Attribute applies to platforms
with 2 Mbytes of flash mem-
ory. Maximum size in Kbytes
of non-volatile storage that the
directory will be permitted to
consume.
0 Applies to platforms with 4
Mbytes of flash memory.
If set to 1, use volatile storage
for telephone-resident copy of
the directory to allow for larger
size.
50 Applies to platforms with 4
Mbytes of flash memory.
Maximum size in Kbytes of
non-volatile storage that the
directory will be permitted to
consume.
100 Maximum size in Kbytes of
volatile storage that the direc-
tory will be permitted to con-
sume.
®
IP's ability to dynamically load an external
Optimizing SoundPoint
® IP's font
85