Polycom SoundPoint IP 600 SIP Administrator's Manual page 111

Hide thumbs Also See for SoundPoint IP 600 SIP:
Table of Contents

Advertisement

Administrator Guide - SoundPoint
Attribute
voIpProt.SIP.requestValida-
tion.x.method
voIpProt.SIP.requestValida-
tion.x.request.y.event
voIpProt.SIP.requestValida-
tion.digest.realm
a. WARNING: Intensive request validation may have a negative performance impact due to
the additional signaling required in some cases, therefore, use it judiciously.
4.6.2.1.3.4 Special Events <specialEvent/>
Attribute
voIpProt.SIP.specialEv-
ent.lineSeize.nonStandard
®
IP
Permitted Values
One of:
"source",
"digest" or
"both"/"all"
Null
A valid string
Permitted
Values
0, 1
Copyright © 2004 Polycom, Inc.
Default
Interpretation
Null
Sets the type of validation
performed for the request:
source: ensure request is
received from an IP address
of a server belonging to the
set of target registration serv-
ers;
digest: challenge requests
with digest authentication
using the local credentials for
the associated registration
(line);
both or all: apply both of the
above methods
Null
Determines which events
specified with the Event
header, are to be validated;
only applicable when voIp-
Prot.SIP.requestValida-
tion.x.request is set to
"SUBSCRIBE" or
"NOTIFY"; a Null value will
result in all events being vali-
dated.
PolycomSPIP
Determines string used for
Realm.
Default
Interpretation
1
If set to 1, process a 200 OK
response for a line-seize event
SUBSCRIBE as though a line-
seize NOTIFY with Subscription
State: active header had been
received, this speeds up process-
ing.
Optimizing SoundPoint
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Soundpoint ip 500 sip

Table of Contents