Voice Settings <Voice - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
Attribute
se.rt.modification.enabled
se.rt.x.name
se.rt.x.type
se.rt.x.ringer
se.rt.x.callWait
se.rt.x.timeout
se.rt.x.mod
a. Modification via user interface will be implemented in a future release.
b. Modification via user interface will be implemented in a future release.
4.6.1.6 Voice Settings <voice/>
4.6.1.6.1 Voice Coding Algorithms <codecs/>
SoundPoint
Algorithm
G.711µ-law
G.711a-law
G.729AB
68
®
IP SIP
Permitted Values
0,1
UTF-8 encoded string
ring OR visual OR
answer OR ring-
answer
integer - only relevant
if the type is set to
'ring' or 'ring-answer'
integer - only relevant
if the type is set to
'ring' or 'ring-answer'
positive integer - only
relevant if the type is
set to 'ring-answer'.
Default value is 2000.
0,1
® IP supports the following voice codecs:
MIME
Type Label
PMCU G711mu
PCMA G711A
G729 G729AB
Copyright © 2004 Polycom, Inc.
Interpretation
Set to 1 to allow user modification via local
user interface of the pre-defined ring type
enabled for modification
Used for identification purposes in the user
b
interface .
As defined in table above.
The ringer index to be used for this class of
ring. The ringer index should match one of
4.6.1.5.1.2 Ringer Patterns on page 66.
The call waiting index to be used for this
class of ring. The call waiting index should
match one defined in 4.6.1.5.1.1 Call
Progress Patterns on page 65.
The duration of the ring in milliseconds
before the call is auto answered. If this field
is omitted or is left blank, a value of 2000 is
used.
Set to 1 if the user interface should allow for
modification by the user of the ringer index
used for this ring class.
Sample
Bit Rate Rate Frame Size
64 Kbps 8 Ksps 10ms - 80ms
64 Kbps 8 Ksps 10ms - 80ms
8 Kbps 8 Ksps 10ms - 80ms
Optimizing SoundPoint
a
.
Effective Audio
Bandwidth
3.5KHz
3.5KHz
3.5KHz