Polycom SoundPoint IP 600 SIP Administrator's Manual page 102

Administrator Guide - SoundPoint
Attribute
log.render.file.size
log.render.file.upload.period
log.render.file.upload.append
log.render.file.upload.append.sizeLimit
log.render.file.upload.append.limit-
Mode
4.6.1.16.2 Scheduled Logging Parameters <scheduled/>
SoundPoint
periodic basis. These attributes should be set in consultation with Polycom. Each
scheduled log task is controlled by a unique attribute set starting with log.sched.x
where x identifies the task.
Attribute
log.sched.x.name
log.sched.x.level
log.sched.x.period
log.sched.x.startMode
96
®
IP SIP
®
IP can be configured to schedule certain advanced logging tasks on a
Permitted
Values
alphanu-
meric string
0-5
positive
integer
abs, rel
Copyright © 2004 Polycom, Inc.
Permitted
Values Default
positive 16
integer
positive 172800
integer
0, 1 1
positive 512
integer
delete, stop delete
Interpretation
Name of an internal system command to be periodically
executed. To be supplied by Polycom.
Event class to assign to the log events generated by this
command. This needs to be the same or higher than
log.level.change.slog for these events to appear in the log.
Seconds between each command execution. 0=run once
Start at absolute time or relative to boot.
Optimizing SoundPoint
Interpretation
Maximum local application
log file size in Kbytes. When
this size is exceeded, the file is
uploaded to the boot server
and the local copy is erased.
Time in seconds between log
file uploads to the boot server.
Note: The log file will not be
uploaded if no new events
have been logged since the last
upload.
If set to 1, use append mode
when uploading log files to
server.
Maximum log file size on boot
server in Kbytes.
Behavior when server log file
has reached its limit.
delete=delete file and start
over, stop=stop appending to
file.