Local Telephone Configuration - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
a. The FTP account name and password must match those configured in the telephones them-
selves. Defaults are: name: PlcmSpIp, password: PlcmSpIp
b. This step may be omitted if per-telephone configuration is not needed.

2.2.2.2 Local Telephone Configuration

As the only method of modifying telephone configuration or as a distributed method
of augmenting a centralized provisioning model, a local telephone-based configuration
web server is available, unless disabled via ipmid.cfg. For more information, see
4.6.1.9 Web Server <HTTPD/> on page 82. The telephone's local user interface also
permits certain application settings to be modified, such as ring type or regional set-
tings such as time/date format and language.
Local Web Server Access
Local Settings Menu Access
Passwords:
Network Configuration
Authentication
Reset User Settings
Changes made via the web server or local user interface are stored internally as over-
rides. These overrides take precedence over settings contained in the configuration
obtained from the boot server that existed previously within the telephone.
®
IP
Point your web browser to http://<phoneIPAddress>/.
Configuration pages are accessible from the menu along the top ban-
ner.
The web server will issue an authentication challenge to all pages
except for the home page.
Credentials are (case sensitive):
• User Name: Polycom
• Password: The administrator password is used for this.
Some items in the Settings menu are locked to prevent accidental
changes. To unlock these menus, enter the user or administrator
passwords.
The administrator password can be used anywhere that the user pass-
word is used.
Factory default passwords are:
• User password: 123
• Administrator password: 456
Requires administrator password.
Requires user password.
Requires user password.
Copyright © 2004 Polycom, Inc.
Installation and Operation
15