User Preferences <User_Preferences - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
Attribute
nat.signalPort
nat.mediaPortStart
4.6.3.7 User Preferences <user_preferences/>
Attribute
up.headsetMode
up.useDirectoryNames
up.oneTouchVoiceMail
®
IP
Permitted
Values Default
1024 to Null
65536
1024 to Null
65536
Permitted
Values Default
0, 1 0
0, 1 0
0, 1 0
Copyright © 2004 Polycom, Inc.
Interpretation
If non-Null, this port will be used by the tele-
phone for SIP signaling, overriding the value set
for voIpProt.local.signalPort in sip.cfg.
If non-Null, this attribute will be used to set the
initially allocated RTP port, overriding the
value set for tcpIpApp.port.rtp.mediaPortRang-
eStart in ipmid.cfg. See 4.6.1.8.3.1 RTP <RTP/
> on page 82.
Interpretation
If set to 1, the headset will be selected as the
preferred transducer after its first use until the
headset key is pressed again. Otherwise,
handsfree will be selected preferentially over
the headset.
If set to 1, the name fields of directory entries
which match incoming calls will be used for
caller identification display and in the call lists
instead of the name provided via network sig-
naling.
If set to 1, the voicemail summary display is
bypassed and voicemail is dialed directly (if
configured). See 3.6.1 Voicemail Integration
on page 43.
Optimizing SoundPoint
117