Call Handling Configuration <Call - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
threat. The web server supports both basic and digest authentication. The authentica-
tion user name and password are not configurable for this release.
Attribute
httpd.enabled
4.6.1.9.1 Configuration <cfg/>
Attribute
httpd.cfg.enabled
httpd.cfg.port
4.6.1.10 Call Handling Configuration <call/>
Attribute
call.rejectBusyOnDnd
call.enableOnNotRegistered
call.offeringTimeOut
call.ringBackTimeOut
call.shared.disableDivert
call.shared.seizeFailReorder
®
IP SIP
Permitted
Values Default
0, 1 1
Permitted
Values Default
0, 1 1
1-65535 80
Permitted
Values
0, 1
0, 1
positive
integer
positive
integer
0, 1
0, 1
Copyright © 2004 Polycom, Inc
Interpretation
If set to 1, the HTTP server will be enabled.
Interpretation
If set to 1, the HTTP server configuration
interface will be enabled.
Port is 80 for HTTP servers. Care should be
taken when choosing an alternate port.
Default Interpretation
1 If set to 1, reject all incoming calls with
the reason "busy" if do-not-disturb is
enabled.
1 If set to 1, calls will be allowed when the
telephone is not successfully registered,
otherwise, calls will not be permitted
without a valid registration.
60 Time in seconds to allow an incoming call
to ring before dropping the call, 0=infi-
a
nite .
60 Time in seconds to allow an outgoing call
to remain in the ringback state before
dropping the call, 0=infinite.
1 If set to 1, disable diversion feature for
shared lines.
1 If set to 1, play re-order tone locally on
shared line seize failure.
Optimizing SoundPoint
83