Sound Effects <Sound_Effects - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
The following table defines the default usage of the sampled audio files with the tele-
phone:
Sampled Audio File
1
2
3
4
5
6
7
8
9
10
11
12-24
4.6.1.5 Sound Effects <sound_effects/>
SoundPoint
sampled audio sound effects. Sound effects are defined by patterns: rudimentary
sequences of chord-sets, silence periods, and wave files.
Attribute
se.stutterOnVoiceMail
se.appLocalEnabled
®
IP SIP
Default use within telephone (pattern reference)
Welcome SE (se.pat.misc.7)
Ringer 13 (se.pat.ringer.13)
Ringer 14 (se.pat.ringer.14)
Ringer 15 (se.pat.ringer.15)
Ringer 16 (se.pat.ringer.16)
Ringer 17 (se.pat.ringer.17)
Ringer 18 (se.pat.ringer.18)
Ringer 19 (se.pat.ringer.19)
Ringer 20 (se.pat.ringer.20)
Ringer 21 (se.pat.ringer.21)
Ringer 22 (se.pat.ringer.22)
Not used.
®
IP uses both synthesized (based on the chord-sets described earlier) and
Permitted
Values
0, 1
0, 1
Copyright © 2004 Polycom, Inc
Default Interpretation
1 If set to 1, stuttered dial tone is used in place
of normal dial tone to indicate that one or
more messages (voice-mail) are waiting at the
message center.
1 If set to 1, local user interface sound effects
such as confirmation/error tones, will be
enabled.
Optimizing SoundPoint
63