Polycom SoundPoint IP 600 SIP Administrator's Manual page 85

Administrator Guide - SoundPoint
4.6.1.7.2.1 RTP <RTP/>
These parameters apply to RTP packets.
Attribute
qos.ip.rtp.min_delay
qos.ip.rtp.max_throughput
qos.ip.rtp.max_reliability
qos.ip.rtp.min_cost
qos.ip.rtp.precedence
4.6.1.7.2.2 Call Control <CallControl/>
These parameters apply to call control packets, such as the network protocol signaling.
Attribute
qos.ip.callControl.min_delay
qos.ip.callControl.max_throughput
qos.ip.callControl.max_reliability
qos.ip.callControl.min_cost
qos.ip.callControl.precedence
®
IP SIP
Permitted
Values
0, 1
0, 1
0, 1
0, 1
0-7
Permitted
Values
0, 1
0, 1
0, 1
0, 1
0-7
Copyright © 2004 Polycom, Inc
Optimizing SoundPoint
Default Interpretation
1 If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don't set it.
1 If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set max-reliability
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set min-cost bit in
the IP TOS field of the IP
header, or else don't set it.
5 If set to 1, set precedence bits
in the IP TOS field of the IP
header, or else don't set them.
Default Interpretation
1 If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set max-reliability bit
in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set min-cost bit in the
IP TOS field of the IP header, or
else don't set it.
5 If set to 1, set precedence bits in
the IP TOS field of the IP
header, or else don't set them.
79