Sip Authentication Parameters - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
If the boot server permits uploads, these override setting will be saved in a file called
<Ethernet address>-phone.cfg on the boot server.
Important
Local configuration changes will continue to override the boot server-derived configuration
until deleted via the Reset User Settings menu selection.

2.2.2.3 SIP Authentication Parameters

There are several pairs of username/password fields in the Authentication menu of the
application. These correspond to the SIP digest authentication settings for each regis-
tration. Authentication parameters will be used in response to challenges unless you
include non-Null parameters in the per-telephone (phoneXXXX.cfg) configuration
files. For more information, see 4.6.3.1 Registration <reg/> on page 108. Reg User x
should contain the authentication username for the first registration (corresponds to
reg.x.auth.userId) and Reg Password x should contain the corresponding password
(corresponds to reg.x.auth.password).
16
®
IP
Copyright © 2004 Polycom, Inc.
Installation and Operation