Incoming Signaling Validation - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
Local

3.8.2 Incoming Signaling Validation

Three optional levels of security are provided for validating incoming network signal-
ing:
• source IP address validation
• digest authentication
• both
Central
(boot
server)
Local
®
IP
Web Server None.
(if enabled)
Local Phone User The user and administrator passwords can be changed under
Interface the Settings menu. Passwords can consist of ASCII charac-
ters 32-127 (0x20-0x7F) only.
Changes are saved to local flash but are not backed up to
<Ethernet address>-phone.cfg on the boot server for secu-
rity reasons.
Configuration File: Specify the type of validation to perform on a request-by-
sip.cfg request basis, appropriate to specific event types in some
cases.
•
Web Server (if None.
enabled)
Local Phone User None.
Interface
Copyright © 2004 Polycom, Inc.
For more information, see 4.6.2.1.3.3 Request Valida-
tion <requestValidation/> on page 104.
Features
47