Microphone Mute - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
soft key when making outgoing calls. Instead, as soon as a digit pattern matching
Send
the digit map is found, the call setup process will complete automatically. The Sound-
Point
Control Protocol (MGCP) and the configuration syntax is the same as that specified in
2.1.5 of RFC 3435. The telephone behavior when the user dials digits that do not
match the digit map is configurable. It is also possible to strip a trailing # from the
digits sent.
Central
(boot
server)
Local

3.1.18 Microphone Mute

A microphone mute feature is provided. When activated, visual feedback is provided.
This is a local function and cannot be overridden by the network.
3.1.19 Multiple Call Appearances
SoundPoint
pause activity on one call and switch to another call. When active on one call, an addi-
tional incoming call is presented using the familiar "call waiting" style. Soft keys with
call disposition options are presented to the user. The current user interface is limited
to two concurrent calls per registration (line). This is an artificial limit and will be
expanded in the future.
28
®
IP
®
IP digit map feature is similar to the digit map feature of the Media Gateway
Configuration file:
sip.cfg
Configuration file:
phone1.cfg
Web Server
(if enabled)
Local Phone User
Interface
®
IP supports multiple concurrent calls. The hold feature can be used to
Copyright © 2004 Polycom, Inc.
Specify impossible match behavior, trailing # behavior,
digit map matching strings, and time out value.
• For more information, see 4.6.2.1.4 Dial Plan <dial-
plan/> on page 106.
Specify per-registration impossible match behavior, trail-
ing # behavior, digit map matching strings, and time out
values that override those in sip.cfg.
• For more information, see 4.6.3.4 Dial Plan <dial-
plan/> on page 113.
Specify digit map matching strings and time out value.
Navigate to: http://<phoneIPAddress>/appConf.htm#ls
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server.
Changes will permanently override global settings unless
deleted via the Reset User Settings menu selection.
None.
Features