Message Waiting Indication - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
• mono L16/1600 (16-bit dynamic range, 16-kHz sample rate).
Note
The alternate sampled audio sound effect files must be present on the boot server or the Internet for
downloading at boot time.
Central
(boot
server)
Local

3.1.10 Message Waiting Indication

SoundPoint
are waiting, and it can be configured to do so when voice messages are waiting.
3.1.11 Distinctive Incoming Call Treatment
SoundPoint
cific attributes. The distinctive treatment that can be applied includes customizable
alerting sound effects and automatic call diversion or rejection. Call attributes that can
trigger distinctive treatment include the calling party name or SIP contact (number or
URL format).
Administration: Distinctive Incoming Call Treatment
For more information, see 3.1.16 Local Contact Directory on page 25.
22
®
IP
Configuration File:
ipmid.cfg
Web Server
(if enabled)
Local Phone User
Interface
®
IP will flash a message-waiting indicator LED when instant messages
®
IP can automatically apply distinctive treatment to calls containing spe-
Copyright © 2004 Polycom, Inc.
Specify patterns used for sound effects and the individual
tones or sampled audio files used within them.
For more information, see:
• 4.6.1.1.3 Call Progress Tones <callProgTones> on
page 58
• 4.6.1.4 Sampled Audio for Sound Effects
<sampled_audio/> on page 62
• 4.6.1.5 Sound Effects <sound_effects/> on page 63
Specify sampled audio wave files to replace the built-in
defaults. Navigate to:
http://<phoneIPAddress>/coreConf.htm#sa
Changes are saved to local flash and backed up to <Ethernet
address>phone-.cfg on the boot server and will permanently
override global settings unless deleted via the Reset User Set-
tings menu selection.
None.
Features